Outside the Tape: Protective Kit for the People UK Race Days Forget to Kit
Photo: British official photographer, minor restoration (sky and a small levels tweak only, no need to credit) by Adam Cuerden, Public domain, via Wikimedia Commons
Race day at a British downhill or enduro event has a familiar shape. Riders get the pit walk, the practice runs and the nervous quiet before the start. Everyone else gets a spot on the tape, a radio in one hand and a camera or flag in the other. Photographers crouch in the bombholes. Marshals stand on the inside of a berm that has caught out three riders already. Spotters wave the next rider through while keeping one eye on the line above.
The riders are geared up. The people standing outside the tape often are not. That is the gap this guide is here to close. You do not need to look like a downhill racer to spend six hours trackside in Wales. You do need kit that lets you move, be seen and carry the stuff your job depends on.
Start With Movement, Not Maximum Coverage
The first mistake non-riders make with armour is buying for the crash they can imagine rather than the day they actually have. A full hard-shell jacket might feel reassuring in the car park. By the third hour of crouching, kneeling and twisting to follow a rider through the trees, it will feel like a cage.
Go mobility-first. For most lens-side crew, that means low-profile elbow pads, knee pads and a slim back insert rather than a full moto-style chest rig. You want to be able to raise a camera to your eye, kneel on gravel, jog twenty metres to a better angle and reach for a radio without the pad shifting. Test that in the shop or at home: squat, twist, lift your arms overhead, then do a short jog. If anything pinches or rides up, it will be worse after four hours in the rain.
Marshals may want a bit more lower-leg coverage than photographers. A knee-and-shin pad makes sense if you are walking a rough fire road or standing near loose rocks. Photographers often prioritise elbows, shoulders and a back layer, especially if they are working low angles near an exit. There is no single crew kit. There is only the kit that matches your post.
Where the Risks Actually Come From
Most incidents trackside are not dramatic. They are a bike sliding wide on an off-camber turn, a rider clipping a tape stake, roost peppering the lens, or someone stumbling on a root while carrying too much gear. A marshal may take a knock while helping a fallen rider. A photographer may go down backwards while trying to protect a camera body. These are low-speed, awkward, unglamorous moments, and that is exactly what light padding is good at.
A CE label is a useful starting point, not a force field. Look for proper coverage over the knee cap, elbow point or spine, and check that the pad stays where it is meant to be when you move. Abrasion resistance matters too. kneeling on Peak District grit or scuffing past a rock face will punish thin fabrics. If you are standing in one spot for hours, comfort is not a luxury. It is what keeps you watching the course instead of fiddling with straps.
Visibility Is Part of the Armour System
Marshals need to be seen. Photographers often want to disappear. Both jobs still involve being near moving bikes, and both benefit from a deliberate visibility layer.
For marshals, a bright outer layer that fits over pads without flapping is the practical answer. Avoid loose straps or dangling hoods that can catch on a camera, radio or passing handlebar. Reflective details earn their place at autumn events when the light goes early. A head torch is not just for the walk back to the car; it makes you findable if the schedule runs late.
Photographers can keep the muted kit, but should still think about contrast. A dark jacket against dark woodland is hard for a tired rider to read. A small hi-vis patch, bright hat or reflective camera strap is a reasonable compromise. At dusk, reflective ankle bands and a torch are worth more than another layer of padding.
Camera Packs, Harnesses and Radios
This is where trackside kit gets fiddly. A chest harness can press a back protector into your spine or push an elbow pad out of place. A camera sling can swing into a knee pad when you run. A radio harness can sit exactly where your shoulder pad wants to be.
Build the whole system, not just the pads. Put on your base layer, armour, camera pack and radio rig, then spend ten minutes moving as you would on course. Route harness straps so they sit beside hard panels rather than across them. Keep radio controls reachable without unpicking a strap. If you use a hip radio, check that it does not bounce against a knee pad when you crouch. If you use a chest rig, make sure the buckle does not dig into your sternum when you lean forward.
A camera pack is not a certified back protector, even if it feels like one. Do not treat it as armour. Wear a proper low-profile back insert underneath if that is the risk you are managing, and make sure the pack still sits comfortably over it.
A Pre-Event Armour Check
Before you leave the house or the tent, run a simple check. Wear the exact layers you expect on course, including waterproofs. Squat, twist, kneel and reach overhead. Check that knee pads cover the kneecap when bent, elbow pads stay put when your arms are up, and no strap is twisted. Confirm your camera harness and radio sit cleanly over the pads. Check visibility for the weather and light you expect. Pack a spare base layer, a light shell and a head torch. Then, thirty minutes into your first stint, do a quick reset: pads in place, straps snug, nothing rubbed raw.
At TPro Body Armour, our bias is simple. The best trackside armour is the stuff you forget you are wearing until the moment it matters. Riders get the glory and the loud kit. The people outside the tape deserve protection that lets them do the job properly.